Fig. 237: Engine Support Fixture Components
Engine Support Fixture
ENGINE MOUNT BRACKET REMOVAL
Fig. 238: Engine Mount Bracket And Bolts
Remove the 3 engine mount bracket bolts (1).
Remove
Special Tools
EN-952 Fixing Pin
EN-953-A Fixing Tool
EN-49977-100 Fixation Sensor Discs
For equivalent regional tools, refer to Special Tools.
Remove the ignition coil. Refer to Ignition Coil R
Fig. 255: Engine Oil Filter Element, Cap And Seal Ring
Remove the engine oil filter cap (2) along with the engine oil filter
cap seal ring (3) and the oil filter
element (1).
Remove the oil pa
Removal Procedure
WARNING: Refer to Brake Fluid Irritant Warning .
CAUTION: Refer to Brake Fluid Effects on Paint and Electrical
Components Caution .
Place the ignition switch in the OFF position.
Remove the battery. Refer to Battery Replacement .
Disconnect the brake fluid level indicator swit
NOTE: The following steps must be completed before using the
symptom tables.
Perform the Diagnostic System Check - Vehicle before using the symptom
tables in order to verify that
all of the following are true:
There are no Diagnostic Trouble Codes (DTC) set.
The devices can communicate via