SYMPTOMS - ENGINE MECHANICAL
Strategy Based Diagnostics
Perform a Diagnostic System Check - Vehicle .
All diagnosis on a vehicle should follow a logical process. Strategy based
diagnostics is a unifo
DRIVE BELT REPLACEMENT
Special Tools
EN-48488 Holding Wrench
EN-955 Locking Pin
For equivalent regional tools, refer to Special Tools.
Removal Procedure
Remove the right front wheelhouse liner.
The vehicle has a shoulder belt
height adjuster for the driver and
right front passenger seating
positions.
Adjust the height so the shoulder
portion of the belt is on the shoulder
but not falling off of it. The belt
should be close to but not
contacting the neck. Improper
shoulder belt height adju
Removal Procedure
Disconnect the throttle body wiring harness connector.
Remove the charge air cooler outlet air hose from the throttle body.
Refer to Charge Air Cooler Outlet
Air Hose Replacement.
Fig. 12: Throttle Body
Remove the 4 throttle body fasteners (3).
Remove the throttle body