Chevrolet Trax: Turbocharger replacement
Chevrolet Trax (2013-2022) Workshop Manual / Engine / Engine Mechanical - 1.4L / Turbocharger replacement
READ NEXT:
Turbocharger replacement - Removal Procedure
Special Tools
EN-49942 Holding Wrench
For equivalent regional tools, refer to Special Tools.
Removal Procedure
Disconnect battery negative cable. Refer to Battery Negative Cable
Disconnection and
Turbocharger replacement - Installation Procedure
Install the assembly parts to the turbocharger as necessary. Refer to
Turbocharger Assemble.
Clean the sealing surfaces.
Fig. 203: Turbocharger Assembly And Gasket
Install a NEW turbocharger
SEE MORE:
DTC P1761
Diagnostic Instructions
Perform the Diagnostic System Check - Vehicle prior to using this
diagnostic procedure.
Review Strategy Based Diagnosis for an overview of the diagnostic
approach.
Diagnostic Procedure Instructions provides an overview of each
diagnostic category.
DTC Descriptor
DT
Catalytic converter movement caution
CAUTION: To prevent internal damage to the flexible coupling of the
catalytic
converter assembly, the converter must be supported. The vertical
movement at the rear of the catalytic converter assembly must not exceed
6 degrees up or down.
CLEAN, DRY, LOW PRESSURE GAS SOURCE CAUTION
CAUTION: Use the
© 2019-2026 Copyright www.chevtrax.com
