Chevrolet Trax: Electrical System
READ NEXT:
The vehicle has fuses and circuit
breakers to protect against an
electrical system overload.
When the current electrical load is
too heavy, the circuit breaker opens
and closes, protecting the circui
To remove the fuse block cover,
squeeze the clip and lift it up.
Caution
Spilling liquid on any electrical
component on the vehicle may
damage it. Always keep the
covers on any electrical
component.
The instrument panel fuse block is
on the underside of the driver side
instrument panel. To access the
fuses, remove the storage
compartment. To remove the
storage compartment, push in on
both side
SEE MORE:
Fuel System Overview
The engine control module (ECM) enables the fuel pump relay when the ignition
switch is turned ON. The
ECM will disable the fuel pump relay within 2 seconds unless the control module
detects ignition reference
pulses. The ECM continues to enable the fuel pump relay as long as
Removal Procedure
Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle
.
NOTE: Support the propeller shaft with mechanics wire.
Remove the propeller shaft from the differential carrier and
relocate to the side. Refer to Two-Piece Propeller Shaft
Replacement
Remove the