SCHEMATIC WIRING DIAGRAMS
HVAC WIRING SCHEMATICS (ENCORE)
Power, Ground, and Blower Motor
Fig. 1: Power, Ground, and Blower Motor
Mode and Temperature Control Actuators
Fig. 2: Mode and Temperatur
Diagnostic Instructions
Perform the Diagnostic System Check - Vehicle prior to using this
diagnostic procedure.
Review Strategy Based Diagnosis for an overview of the diagnostic
approach.
Diag
Diagnostic Instructions
Perform the Diagnostic System Check - Vehicle prior to using this
diagnostic procedure.
Review Strategy Based Diagnosis for an overview of the diagnostic
approach.
Diag
Fig. 9: Rear Wheel Bearing And Hub (With Drum Brakes)
Rear Wheel Bearing and Hub Replacement (With Drum Brakes)
STRUT AND SHOCK ABSORBER INSPECTION
NOTE: The shock absorber assembly DOES NOT have to be removed from
the vehicle
to perform the following inspection procedure.
NOTE: A light film of
To adjust the power driver seat,
if available:
Move the seat forward or
rearward by sliding the control
forward or rearward.
Raise or lower the front part of
the seat cushion by moving the
front of the control up or down.
Raise or lower the entire seat by
moving the rear of the control up