Chevrolet Trax Owners & Service Manuals

Chevrolet Trax: Repair instructions

READ NEXT:

 Heater and air conditioning control replacement (C60)

Fig. 6: Heater and Air Conditioning Control Heater and Air Conditioning Control Replacement (C60) HEATER AND AIR CONDITIONING REMOTE CONTROL REPLACEMENT (C67) Fig. 7: Heater And Air Conditioni

 Mode control cam alignment (C60)

Alignment Procedure NOTE: The HVAC module must be removed to accurately set the mode cam gear timing. Failure to do so may result in poor HVAC performance, and damage to the HVAC module. Remove the

 Description and operation

MANUAL HVAC DESCRIPTION AND OPERATION The air temperature and the air delivery description and operation are divided into five areas: HVAC Control Components Air Speed Air Delivery Heating and A

SEE MORE:

 Clutch pressure and driven plate replacement (1.6L AND 1.8L)

Special Tools DT-6263 Remover/Installer Kit DT-6263-32 Clutch Center Guide EN-652 Flywheel Holder For equivalent regional tools, refer to Special Tools. Removal Procedure NOTE: To prevent damage to the spring fangs of pressure plate use the DT-6263 remover/installer to remove and install

 DTC P0480, P0481, P0691, P0692, P0693, OR P0694 (LUJ OR LUV): Cooling fan relay 1/2/3 control circuit

Diagnostic Instructions Perform the Diagnostic System Check - Vehicle prior to using this diagnostic procedure. Review Strategy Based Diagnosis for an overview of the diagnostic approach. Diagnostic Procedure Instructions provides an overview of each diagnostic category. DTC Descriptors D

© 2019-2026 Copyright www.chevtrax.com