Chevrolet Trax: Bulb Replacement
Chevrolet Trax (2013-2022) Owner's Manual / Vehicle Care / Bulb Replacement
For the proper type of replacement bulbs, see Replacement Bulbs
For any bulb-changing procedure not listed in this section, contact your dealer.
Halogen Bulbs
Warning
Halogen bulbs have pressurized gas inside and can burst if you drop or scratch the bulb. You or others could be injured. Be sure to read and follow the instructions on the bulb package.
READ NEXT:
Headlamps, Front Turn
Signal and Parking
Lamps
Driver Side Shown, Passenger Side Similar
Low-Beam Headlamp
Turn Signal Lamp
High-Beam Headlamp
Parking Lamp
High-Beam Headlamp/ Low-Beam Headlamp
Open the hood. See Hood
Remove the hea
License Plate Lamp
Lamp Assembly
Bulb Assembly
To replace one of these bulbs:
Push the left end of the lamp
assembly toward the right.
Turn the lamp assembly down to
remove it.
Turn the bulb socket (1)
counte
SEE MORE:
DTC B3949
Ignition OFF, disconnect the X2 harness connector at the K9 Body Control
Module, ignition ON.
Verify a test lamp illuminates between the B+ circuit terminal 3 and
ground.
If the test lamp does not illuminate and the circuit fuse is good
Ignition OFF.
Test for less than 2 ohms in the B+
Schematic wiring diagrams
SPECIFICATIONS
FASTENER TIGHTENING SPECIFICATIONS
Fastener Tightening Specifications
SCHEMATIC WIRING DIAGRAMS
MOVEABLE WINDOW WIRING SCHEMATICS (ENCORE)
Front Windows
Fig. 1: Front Windows
Rear Windows
Fig. 2: Rear Windows
MOVEABLE WINDOW WIRING SCHEMATICS (TRAX)
Front and Rear Power Windows
© 2019-2026 Copyright www.chevtrax.com
