Chevrolet Trax: Seat Belts
Chevrolet Trax (2013-2022) Workshop Manual / HVAC & Restraints / Seat Belts
READ NEXT:
Seat belt system operational and functional checks
SPECIFICATIONS
FASTENER TIGHTENING SPECIFICATIONS
Fastener Tightening Specifications
SCHEMATIC WIRING DIAGRAMS
SEAT BELT WIRING SCHEMATICS (ENCORE)
Switches and Indicator
Fig. 1: Switches and Indi
DTC B0072 OR B0073: Seat belt switch
Diagnostic Instructions
Perform the Diagnostic System Check - Vehicle prior to using this
diagnostic procedure.
Review Strategy Based Diagnosis for an overview of the diagnostic
approach.
Diag
SEE MORE:
Turbocharger replacement - Removal Procedure
Special Tools
EN-49942 Holding Wrench
For equivalent regional tools, refer to Special Tools.
Removal Procedure
Disconnect battery negative cable. Refer to Battery Negative Cable
Disconnection and Connection .
Drain the cooling system. Refer to Cooling System Draining and Filling .
Remove the a
Fuel system description (LUJ)
Fuel System Overview
The engine control module (ECM) enables the fuel pump relay when the ignition
switch is turned ON. The
ECM will disable the fuel pump relay within 2 seconds unless the control module
detects ignition reference
pulses. The ECM continues to enable the fuel pump relay as long as
© 2019-2026 Copyright www.chevtrax.com
