Chevrolet Trax Owners & Service Manuals

Chevrolet Trax: Repair instructions

READ NEXT:

 Parking brake lever replacement (disc brake)

Removal Procedure Remove the front floor console. Refer to Front Floor Console Replacement (Encore) , Front Floor Console Replacement (Trax) . Ensure that the parking brake lever is in the fully

 Parking brake lever replacement (drum brake)

Removal Procedure Remove the front floor console. Refer to Front Floor Console Replacement (Encore) , Front Floor Console Replacement (Trax) . Ensure that the parking brake lever is in the fully

 Parking brake cable replacement

Removal Procedure WARNING: Refer to Brake Dust Warning . Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle . Remove the tire and wheel assembly. Refer to Tire and Wheel Remo

SEE MORE:

 Compass calibration and magnetic variance (driver information center (DIC))

Compass Calibration The compass direction will show CAL if it needs to be calibrated. Before calibrating the compass, drive the vehicle to an area that is magnetically clean (free of large metallic objects). Turn ON the ignition. Before calibrating the compass, make sure the compass is set to th

 Clutch pressure and driven plate replacement (1.6L AND 1.8L)

Special Tools DT-6263 Remover/Installer Kit DT-6263-32 Clutch Center Guide EN-652 Flywheel Holder For equivalent regional tools, refer to Special Tools. Removal Procedure NOTE: To prevent damage to the spring fangs of pressure plate use the DT-6263 remover/installer to remove and install

© 2019-2026 Copyright www.chevtrax.com