Chevrolet Trax: Rear Suspension
Chevrolet Trax (2013-2022) Workshop Manual / Suspension & Steering / Rear Suspension
READ NEXT:
Rear wheel bearing and hub replacement (with disc brakes)
SPECIFICATIONS
FASTENER TIGHTENING SPECIFICATIONS
Fastener Tightening Specifications
REPAIR INSTRUCTIONS
REAR WHEEL BEARING AND HUB REPLACEMENT (WITH DISC BRAKES)
Special Tools
CH 50559 Wheel Hub/Be
Rear wheel bearing and hub replacement (with drum brakes)
Fig. 9: Rear Wheel Bearing And Hub (With Drum Brakes)
Rear Wheel Bearing and Hub Replacement (With Drum Brakes)
STRUT AND SHOCK ABSORBER INSPECTION
NOTE: The shock absorber assembly DOES NOT have
SEE MORE:
Rear washer system malfunction
Diagnostic Instructions
Perform the Diagnostic System Check - Vehicle prior to using this
diagnostic procedure.
Review Strategy Based Diagnosis for an overview of the diagnostic
approach.
Diagnostic Procedure Instructions provides an overview of each
diagnostic category.
DTC Descriptor
DT
Adhesive installation of windshields
WARNING: Refer to Glass and Sheet Metal Handling Warning .
Use a urethane adhesive systems which meet GM Specification GMW 15672.
Remove all mounds or loose pieces of urethane adhesive from the
pinchweld area.
If the original window is being reused, remove all but approximately 2
mm (3/64 in
© 2019-2025 Copyright www.chevtrax.com
