The exterior lamp control is to the
left of the steering column on the
instrument panel.
There are four positions:
(Off): Briefly turn to this
position
to turn the automatic lamp control
off or o
(Headlamp High/Low-Beam
Changer): Push the turn signal
lever away from you and release, to
turn the high beams on.
To return to low beams, push the
lever again or pull it toward you and
release.
Th
If equipped, the headlamps come on
automatically when it is dark enough
outside and the exterior lamp
control is in the automatic position.
See Exterior Lamp Controls
The vehicle has a light sensor
NOTE:
DO NOT program a control module unless directed to by a service
procedure or a service bulletin. If the control module is not properly
configured with the correct calibration software, the control module will
not control all of the vehicle features properly.
Ensure the programming tool
Fig. 12: Drive Range, Third Gear -- Gen 2/Hybrid Fluid Flow Diagram
Drive Range - Fourth Gear (Gen 2/Hybrid)
As vehicle speed increases, the transmission control module (TCM) processes
input signals from the automatic
transmission input and output speed sensors, the throttle position sensor and