Chevrolet Trax: Collision Repair
Chevrolet Trax (2013-2022) Workshop Manual / Accessories & Equipment / Collision Repair
- Specifications
- Collision Repair - Visual identification
- Collision repair - Repair instructions
- Description and operation
READ NEXT:
Specifications
DIMENSIONS - BODY (ENCORE)
Point-to-point measurements are for reference only. All measurements are
given in millimeters. Use these
measurements for diagnosing and estimating. Point-to-point measurem
Collision Repair - Visual identification
STRUCTURE IDENTIFICATION
Fig. 13: Front Structure
View Front
Fig. 14: Rear Structure
View Rear
SEE MORE:
Automatic transmission range selector lever replacement
Removal Procedure
Set the park brake and chock the wheels.
Fig. 4: Automatic Transmission Range Selector Lever Cable Terminal And Shift
Lever Pin
Disconnect the transmission range selector lever cable terminal (1) from
the transmission manual shift
lever pin.
Press the locking tabs inwar
DTC C0277: Brake pedal position sensor circuit calibration not learned
Diagnostic Instructions
Perform the Diagnostic System Check - Vehicle prior to using this
diagnostic procedure.
Review Strategy Based Diagnosis for an overview of the diagnostic
approach.
Diagnostic Procedure Instructions provides an overview of each
diagnostic category.
DTC Descriptors
D
© 2019-2025 Copyright www.chevtrax.com
