Chevrolet Trax: Schematic wiring diagrams
Chevrolet Trax (2013-2022) Workshop Manual / Accessories & Equipment / Horns / Schematic wiring diagrams
SPECIFICATIONS
FASTENER TIGHTENING SPECIFICATIONS
Fastener Tightening Specifications
.jpg)
SCHEMATIC WIRING DIAGRAMS
HORN WIRING SCHEMATICS (ENCORE)
Fig. 1: Horn (Encore)
HORN WIRING SCHEMATICS (TRAX)
Horn
Fig. 2: Horn (Trax)
READ NEXT:
DTC B2750: Horn relay secondary circuit
DIAGNOSTIC CODE INDEX
Diagnostic Instructions
Perform the Diagnostic System Check - Vehicle prior to using this
diagnostic procedure.
Review Strategy Based Diagnosis for an overview of the diag
Horns malfunction
Diagnostic Instructions
Perform the Diagnostic System Check - Vehicle prior to using this
diagnostic procedure.
Review Strategy Based Diagnosis for an overview of the diagnostic
approach.
Diag
SEE MORE:
Headlamp High/Low-Beam Changer
(Headlamp High/Low-Beam
Changer): Push the turn signal
lever away from you and release, to
turn the high beams on.
To return to low beams, push the
lever again or pull it toward you and
release.
This indicator light turns on in
the
instrument cluster when the
high-beam headlamps are on.
Flash-to
Mode control cam alignment (C60)
Alignment Procedure
NOTE: The HVAC module must be removed to accurately set the mode
cam gear
timing. Failure to do so may result in poor HVAC performance, and
damage to the HVAC module.
Remove the heater and air conditioning evaporator and blower module
assembly (HVAC). Refer to
Heater and Ai
© 2019-2026 Copyright www.chevtrax.com
