Chevrolet Trax: Schematic wiring diagrams
SPECIFICATIONS
AMBIENT AIR TEMPERATURE SENSOR RESISTANCE
Ambient Air Temperature Sensor Resistance
.jpg)
SCHEMATIC WIRING DIAGRAMS
INSTRUMENT CLUSTER WIRING SCHEMATICS (ENCORE)
Power, Ground, Serial Data, and Gauges
Fig. 1: Power, Ground, Serial Data, and Gauges
Indicators
Fig. 2: Indicators
Air Temperature and Driver Information Center
Fig. 3: Air Temperature and Driver Information Center
INSTRUMENT CLUSTER WIRING SCHEMATICS (TRAX)
Power, Ground, Serial Data, and Gauges
Fig. 4: Power, Ground, Serial Data, and Gauges
Indicators
Fig. 5: Indicators
Air Temperature, Turn Signal and Driver Information Center
Fig. 6: Air Temperature, Turn Signal and Driver Information Center
AUDIBLE WARNINGS WIRING SCHEMATICS (ENCORE)
Audible Warnings
Fig. 7: Audible Warnings
AUDIBLE WARNINGS WIRING SCHEMATICS (TRAX)
Audible Warnings
Fig. 8: Audible Warnings
DIAGNOSTIC INFORMATION AND PROCEDURES
- DTC B0158: Ambient air temperature sensor
- DTC B0550: Odometer circuit general memory malfunction
- DTC B071F: Transmission shift indicator internal malfunction
- DTC B3567: Info display select switch
- DTC P0461-P0464 (FWD): Fuel level sensor
- DTC P0461-P0464, P2066, P2067, OR P2068 (AWD): Fuel level sensor
- DTC P0520: Engine oil pressure switch circuit
- DTC P0521: Engine oil pressure sensor performance malfunction
- Charge indicator malfunction
- Driver information center switch malfunction
- Driver information center display malfunction
- Fuel gauge malfunction
- Odometer trip/reset switch malfunction (trax)
- Speedometer and/or odometer malfunction (encore)
- Tachometer inaccurate or inoperative (trax)
READ NEXT:
DTC B0158: Ambient air temperature sensor
DIAGNOSTIC CODE INDEX
Diagnostic Instructions
Perform the Diagnostic System Check - Vehicle prior to using this
diagnostic procedure.
Review Strategy Based Diagnosis for an overview of the diag
DTC B0550: Odometer circuit general memory malfunction
Diagnostic Instructions
Perform the Diagnostic System Check - Vehicle prior to using this
diagnostic procedure.
Review Strategy Based Diagnosis for an overview of the diagnostic
approach.
Diag
DTC B071F: Transmission shift indicator internal malfunction
Diagnostic Instructions
Perform the Diagnostic System Check - Vehicle prior to using this
diagnostic procedure.
Review Strategy Based Diagnosis for an overview of the diagnostic
approach.
Diag
SEE MORE:
DTC B3882
Ignition OFF, exterior lamps OFF, trunk latch latched, remove the E5AB
Tail/Stop Lamp - Right bulb.
Test for less than 5 ohms between the ground circuit at the socket
terminal and ground.
If 5 ohms or greater
Ignition OFF.
Test for less than 2 ohms in the ground circuit end to end.
Symptoms - wiper/washer systems
NOTE: The following steps must be completed before using the
symptom tables:
Perform Diagnostic System Check - Vehicle , in order to verify that all
of the following conditions are
true:
No DTCs are set.
The control modules can communicate via the serial data link.
Refer to Wiper/Washer
