Chevrolet Trax: Repair instructions
Chevrolet Trax (2013-2022) Workshop Manual / HVAC & Restraints / HVAC - Automatic / Repair instructions
- Heater and air conditioning control replacement
- Inside air moisture and windshield temperature sensor replacement (with CJ2)
READ NEXT:
Heater and air conditioning control replacement
Fig. 6: Heater And Air Conditioning Control
Heater and Air Conditioning Control Replacement
HEATER AND AIR CONDITIONING REMOTE CONTROL REPLACEMENT
Fig. 7: Heater And Air Conditioning Remote Cont
Inside air moisture and windshield temperature sensor replacement (with
CJ2)
Fig. 15: Inside Air Moisture And Windshield Temperature Sensor (With CJ2)
Inside Air Moisture and Windshield Temperature Sensor Replacement (With
CJ2)
SUN LOAD TEMPERATURE SENSOR REPLACEMENT
Fi
Description and operation
AUTOMATIC HVAC DESCRIPTION AND OPERATION
The air temperature and the air delivery description and operation are
divided into five areas:
HVAC Control Components
Air Speed
Air Delivery
Heating an
SEE MORE:
Intake manifold replacement - Installation Procedure
Clean the sealing surfaces.
Fig. 38: Intake Manifold
Install the intake manifold (1) along with a NEW intake manifold gasket.
Fig. 39: Intake Manifold Bolts
CAUTION: Refer to Fastener Caution .
Install the 6 intake manifold bolts (1) and tighten to 20 (15 lb ft).
Fig. 40: Fuel Feed Pi
DTC P018B-P018D (Chassis control module)
Diagnostic Instructions
Perform the Diagnostic System Check - Vehicle prior to using this
diagnostic procedure.
Review Strategy Based Diagnosis for an overview of the diagnostic
approach.
Diagnostic Procedure Instructions provides an overview of each
diagnostic category.
DTC Descriptors
D
© 2019-2026 Copyright www.chevtrax.com
