Chevrolet Trax: Remote Functions
Chevrolet Trax (2013-2022) Workshop Manual / Accessories & Equipment / Remote Functions
- Remote Functions - Diagnostic information and procedures
- Remote functions - Description and operation
READ NEXT:
Remote Functions - Diagnostic information and procedures
SCHEMATIC WIRING DIAGRAMS
REMOTE FUNCTION WIRING SCHEMATICS (ENCORE)
Keyless Entry System
Fig. 1: Keyless Entry System (Encore)
REMOTE FUNCTION WIRING SCHEMATICS (TRAX)
Keyless Entry System
Fig. 1
DTC B3101: Keyless entry data link circuit
Diagnostic Instructions
Perform the Diagnostic System Check - Vehicle prior to using this
diagnostic procedure
Review Strategy Based Diagnosis for an overview of the diagnostic
approach.
Diagn
DTC B3105: Keyless entry transmitters
Diagnostic Instructions
Perform the Diagnostic System Check - Vehicle prior to using this
diagnostic procedure.
Review Strategy Based Diagnosis for an overview of the diagnostic
approach.
Diag
SEE MORE:
Wheel drive shaft outer joint inspection
Disassembly Procedure
Remove the outer constant velocity (CV) joint and boot from the wheel
drive shaft. Refer to Front Wheel
Drive Shaft Outer Joint and Boot Replacement.
Remove any lubricant from the CV joint.
Fig. 64: Taping Gently On Brass Drift With A Hammer In Order To Tilt Cage
NOTE:
Rear brake intermediate pipe replacement (right)
Removal Procedure
WARNING: Refer to Brake Fluid Irritant Warning .
Remove the battery. Refer to Battery Replacement .
Fig. 128: Brake Pressure Modulator Valve (BPMV) And Rear Intermediate Pipe
Fitting
Disconnect the right rear intermediate pipe fitting (1) from the brake
pressure modulator
© 2019-2026 Copyright www.chevtrax.com
