Repair Procedure
Thoroughly wash the repair area with Liquid Wash and Wax GM P/N 1052870
or the equivalent.
Environmental damage may be corrected. Refer to Environmental Fallout (Acid
Rain), or
Paint thickness gauges measure the total thickness of the vehicle finish. It
is important to accurately measure the
thickness of the finish on each vehicle as the thickness of the finish will vary
o
SCHEMATIC WIRING DIAGRAMS
DRIVER SEAT WIRING SCHEMATICS (ENCORE)
Power Seat (Without AAG) and Lumbar
Fig. 1: Power Seat (Without AAG) and Lumbar
Module Power, Ground, Serial Data, and Memory Control
AIR/WIND NOISE
Special Tools
CH-39570 Chassis Ear
GE-41416 Ultrasonic Leak Detector
WARNING: An assistant should drive the vehicle while the technician
checks for the
location of the reported condition. Otherwise, personal injury could
result.
To analyze a reported windnoise condition, test dri
NOTE: The use of a LOW PROFILE LIFT ARMS SYSTEM may be required to
avoid
unwanted contact with the vehicle's body and structure depending on lifting
equipment used. Refer to the manufacture's recommendation for their
applications of low profile lift arms system for their lifting equipment.
Fig. 1