Chevrolet Trax: Paint and Coatings
Chevrolet Trax (2013-2022) Workshop Manual / Accessories & Equipment / Paint and Coatings
READ NEXT:
Paint and Coatings - Introduction
BASECOAT/CLEARCOAT PAINT SYSTEMS
WARNING: Exposure to isocyanates during paint preparation and
application
processes can cause severe breathing problems. Read and follow all of
the instructions from
Clearcoat repair without repainting
Repair Procedure
Thoroughly wash the repair area with Liquid Wash and Wax GM P/N 1052870
or the equivalent.
Environmental damage may be corrected. Refer to Environmental Fallout (Acid
Rain), or
SEE MORE:
DTC B3950
Ignition OFF, disconnect the X2 harness connector at the K9 Body Control
Module, ignition ON.
Verify a test lamp illuminates between the B+ circuit terminal 3 and
ground.
If the test lamp does not illuminate and the circuit fuse is good
Ignition OFF.
Test for less than 2 ohms in the B+
Radio control programming and setup
NOTE:
DO NOT program a control module unless directed to by a service
procedure or a service bulletin. If the ECU is not properly configured with
the correct calibration software, the ECU will not control all of the
vehicle
features properly.
Ensure the programming tool is equipped with the
© 2019-2026 Copyright www.chevtrax.com
