Chevrolet Trax: Disc Brakes
Chevrolet Trax (2013-2022) Workshop Manual / Brakes / Disc Brakes
READ NEXT:
Brake rotor thickness measurement
SPECIFICATIONS
FASTENER TIGHTENING SPECIFICATIONS
Fastener Tightening Specifications
DISC BRAKE COMPONENT SPECIFICATIONS
Disc Brake Component Specifications
DIAGNOSTIC INFORMATION AND PROCEDURES
Brake rotor surface and wear inspection
WARNING: Refer to Brake Dust Warning .
If the inboard friction surface of the brake rotor is not accessible,
reposition and support the caliper with
the brake pads. Refer to Front Disc Brake Pads
SEE MORE:
Camshaft timing chain removal
Special Tools
EN-952 Fixing Pin
EN-953-A Fixing Tool
EN-955-10 Fixing Pin from EN-955 Kit
For equivalent regional tools, refer to Special Tools.
The engine should be adjusted to TDC.
The crankshaft should be fixed with EN-952 fixing pin.
The camshaft should be fixed with EN-953-A fixing too
Front brake caliper bracket replacement
Removal Procedure
WARNING: Refer to Brake Dust Warning .
Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle
.
Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and
Installation .
Fig. 38: Upper And Lower Brake Caliper Guide Pin Bolts
NOTE:
DO NOT us
© 2019-2026 Copyright www.chevtrax.com
