Chevrolet Trax: Waveforms - Injector Pattern Tutorial
Chevrolet Trax (2013-2022) Workshop Manual / General Information & Maintenance / Waveforms - Injector Pattern Tutorial
- Purpose of this article
- Is a lab scope necessary?
- The two types of injector drivers
- Interpreting injector waveforms
- Current waveform samples
- Voltage waveform samples
READ NEXT:
Purpose of this article
NOTE: This is GENERAL information. This article is not intended to
be specific to any
unique situation or individual vehicle configuration. For model-specific
information see appropriate articles whe
Use the Right Noid Light
INTRODUCTION
You probably have several tools at your disposal to diagnose injector
circuits. But you might have questioned
"Is a lab scope necessary to do a thorough job, or will a set of noid lights
SEE MORE:
Windshield replacement
Special Tools
BO-24402-A Glass Sealant Remover (Cold Knife)
BO-39032 Stationary Glass Removal Tool
Use an adhesive that is approved by GM
For equivalent regional tools, refer to Special Tools.
Removal Procedure
Open the hood.
Remove the windshield wiper arms. Refer to Windshield Wiper Arm
Electrical System
Overload
The vehicle has fuses and circuit
breakers to protect against an
electrical system overload.
When the current electrical load is
too heavy, the circuit breaker opens
and closes, protecting the circuit
until the current load returns to
normal or the problem is fixed. This
greatly reduces the chance
© 2019-2026 Copyright www.chevtrax.com
