WATERLEAK TEST PREPARATION
GM vehicles are designed to operate under normal environmental
conditions.
The design criteria for sealing materials and components takes into
consideration the seali
BODY WATERLEAK REPAIR
Fig. 6: Cutting Out A Portion Of The Adhesive Caulking (1 Of 2)
WARNING: If the vehicle interior is exposed to moisture and becomes
soaked up to
the level of the sensing and d
PLEASE READ THIS FIRST *
This article is intended for general information purposes only. This
information may not apply to all makes and
models. If vehicle is equipped with Anti-Lock Brake System (AB
Removal Procedure
Remove the power brake booster pump assembly. Refer to Power Brake
Booster Pump Replacement.
Fig. 187: Power Brake Booster Pump
Disconnect the power brake booster pump vent hose (1).
Release the power brake booster pump electrical harness and retainer
from the power bra
For vehicles with the Rear Parking
Assist (RPA) system, it assists the
driver with parking and avoiding
objects while in R (Reverse). RPA
operates at speeds less than 8 km/h
(5 mph), and the sensors on the rear
bumper detect objects up to 2.5m
(8 ft) behind the vehicle, and at least
20 cm (8 in) off