Chevrolet Trax: Playing the Radio with Touchscreen
Audio Source Menu
.gif)
VOL
.gif)
(Volume): Press to
increase or decrease the volume.
.gif)
(Power): Press and hold to turn
the system on and off.
.gif)
(Home Page): Press to enter
the Home Page.
RDS (Radio Data System)
If equipped, the RDS feature is available for use only on FM stations that broadcast RDS information. This feature only works when the information from the radio station is available. In rare cases, a radio station could broadcast incorrect information that causes the radio features to work improperly.
If this happens, contact the radio station.
While the radio is tuned to an FM-RDS station, the station name or call letters display.
Selecting a Band
Press .gif)
, audio, then Source
.gif)
to
choose AM, FM, or SiriusXM,
if equipped. The last station that
was playing starts playing again.
Selecting an Auxiliary Device
.gif)
Connect the auxiliary device to
the
AUX input terminal. Play will begin
when the system has finished
reading the information on the
device.
If the storage device is already
connected, press .gif)
, audio, Source
.gif)
, then select AUX from the
drop-down menu.
READ NEXT:
Selecting a Station
Seek Tuning
If the radio station is not known:
Press SEEK
to automatically
search for available radio stations.
Hold and drag to the left or right of
the radio station to automatically
search for a
Satellite Radio
Vehicles with a SiriusXM Satellite
Radio tuner and a valid SiriusXM
Satellite subscription can receive
SiriusXM programming.
SiriusXM Satellite Radio
Service
SiriusXM is a satellite radio service
base
Radio Reception
Frequency interference and static
can occur during normal radio
reception if items such as mobile
phone chargers, vehicle
convenience accessories, and
external electronic devices are
plugged into the
SEE MORE:
Description and operation
CLUTCH SYSTEM DESCRIPTION AND OPERATION
Clutch Spin Down Time
Inspect the clutch spin down time as follows:
Apply the parking brake and block the vehicle wheels.
Shift the manual transmission into NEUTRAL.
Start the engine. Run the engine at idle speed.
Engage the clutch.
Disengage the clutch.
Rear brake backing plate replacement
Removal Procedure
WARNING: Refer to Brake Dust Warning .
Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle
.
Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and
Installation .
Remove the rear wheel speed sensor, if equipped. Refer to Rear Wheel
Spe
