Chevrolet Trax: Object Detection and Pedestrian Protection - Diagnostic information and procedures
Chevrolet Trax (2013-2022) Workshop Manual / Accessories & Equipment / Object Detection and Pedestrian Protection / Object Detection and Pedestrian Protection - Diagnostic
information and procedures
- DTC B094C: Right side object detection control module
- DTC B0954, B0955, B0956, OR B0957: Parking assist front sensor
- DTC B0958, B0959, B0960, OR B0961: Parking assist rear sensor
- DTC B0987: Vehicle direction camera indicator
- DTC B1011: System disabled information stored malfunction
- DTC B1015: Vehicle identification number information malfunction
- DTC B101D (with side blind zone alert, uft): electronic control unit hardware
- DTC B1405 (Rear park assist - ud7): control module voltage reference output 2
- DTC B1405 (Front and rear park assist - ud5): control module voltage reference output 2
- DTC B356A: Vehicle direction warning switch circuit
- Front view camera module malfunction (forward collision alert - UEU)
- Parking assist system malfunction
- Rear vision camera system malfunction
- Side object system malfunction
- Lane departure warning system malfunction
READ NEXT:
DTC B094C: Right side object detection control module
DIAGNOSTIC CODE INDEX
Diagnostic Instructions
Perform the Diagnostic System Check - Vehicle prior to using this
diagnostic procedure.
Review Strategy Based Diagnosis for an overview of the di
DTC B0954, B0955, B0956, OR B0957: Parking assist front sensor
Diagnostic Instructions
Perform the Diagnostic System Check - Vehicle prior to using this
diagnostic procedure.
Review Strategy Based Diagnosis for an overview of the diagnostic
approach.
Diag
DTC B0958, B0959, B0960, OR B0961: Parking assist rear sensor
Diagnostic Instructions
Perform the Diagnostic System Check - Vehicle prior to using this
diagnostic procedure.
Review Strategy Based Diagnosis for an overview of the diagnostic
approach.
Diag
SEE MORE:
Fuel system description (LUJ)
Fuel System Overview
The engine control module (ECM) enables the fuel pump relay when the ignition
switch is turned ON. The
ECM will disable the fuel pump relay within 2 seconds unless the control module
detects ignition reference
pulses. The ECM continues to enable the fuel pump relay as long as
Compass
The vehicle may have a compass
display in the Driver Information
Center (DIC).
Setting the Compass Zone
Under certain circumstances, such
as during a long trip or moving to a
new area, the compass zone will
need to be reset. If the compass is
not set to the correct zone, it may
give false readings.
© 2019-2026 Copyright www.chevtrax.com
