Chevrolet Trax: Engine Heating and Cooling - Diagnostic information and procedures
Chevrolet Trax (2013-2022) Workshop Manual / Engine / Engine Heating and Cooling / Engine Heating and Cooling - Diagnostic information and procedures
- DTC P00B3 OR P00B4 (2H0 OR LUJ): Radiator coolant temperature (RCT) sensor
- DTC P00B6 (2H0 OR LUJ): Radiator coolant temperature (RCT) Sensor
- DTC P00B7 (2H0 OR LUJ): Engine coolant flow insufficient
- DTC P0480 OR P0481 (2H0): Cooling fan relay 1/2 control circuit
- DTC P0480, P0481, P0691, P0692, P0693, OR P0694 (LUJ OR LUV): Cooling fan relay 1/2/3 control circuit
- DTC P0597-P0599 (2H0 OR LUJ): Engine coolant thermostat heater control Circuit
- DTC P2181 (2H0 OR LUJ): Engine cooling system performance
- Cooling fan always on (LUJ OR LUV)
- Cooling fan always ON (2H0)
- Cooling fan inoperative (LUJ OR LUV)
- Cooling fan inoperative (2H0)
READ NEXT:
DTC P00B3 OR P00B4 (2H0 OR LUJ): Radiator coolant temperature (RCT) sensor
DIAGNOSTIC CODE INDEX
Diagnostic Instructions
Perform the Diagnostic System Check - Vehicle prior to using this
diagnostic procedure.
Review Strategy Based Diagnosis for an overview of the di
DTC P00B6 (2H0 OR LUJ): Radiator coolant temperature (RCT) Sensor
Diagnostic Instructions
Perform the Diagnostic System Check - Vehicle prior to using this
diagnostic procedure.
Review Strategy Based Diagnosis for an overview of the diagnostic
approach.
Diag
DTC P00B7 (2H0 OR LUJ): Engine coolant flow insufficient
Diagnostic Instructions
Perform the Diagnostic System Check - Vehicle prior to using this
diagnostic procedure.
Review Strategy Based Diagnosis for an overview of the diagnostic
approach.
Diag
SEE MORE:
The two types of injector drivers
NOTE: This is GENERAL information. This article is not intended to
be specific to any
unique situation or individual vehicle configuration. For model-specific
information see appropriate articles where available.
OVERVIEW
There are two types of transistor driver circuits used to operate electric
f
Front side door outer panel replacement
Special Tools
BO-6392 Flanging Tool Kit
BO-6396 Bonding Pliers
For equivalent regional tools, refer to Special Tools.
NOTE: According to different corrosion warranties, only the
regional mandatory joining
methods are allowed.
Removal Procedure
WARNING: Refer to Glass and Sheet Metal Handling Wa
© 2019-2025 Copyright www.chevtrax.com
