Chevrolet Trax: Wheel Drive Shafts

 Plastic Panel Information and Repair - Description and operation

HOW TO IDENTIFY PLASTIC PARTS Fig. 1: Identifying SAE Code Plastic parts can be identified by the SAE code, which is usually found on the rear of the part, and/or by the characteristics of the plastic. Knowing the type of plastic aids in selecting the proper repair materials and in selecting the

 Rear brake intermediate pipe replacement (left)

Removal Procedure WARNING: Refer to Brake Fluid Irritant Warning . Remove the battery. Refer to Battery Replacement Fig. 106: Left Rear Intermediate Pipe Fitting Disconnect the left rear intermediate pipe fitting (1) from the brake pressure modulator valve (BPMV). Plug the BPMV outlet port