Chevrolet Trax: Wheel Alignment System - Description and operation
Chevrolet Trax (2013-2022) Workshop Manual / Suspension & Steering / Wheel Alignment System / Wheel Alignment System - Description and operation
READ NEXT:
Camber description
Fig. 3: Illustrating Camber Angle
Camber is the tilting of the wheels from the vertical when viewed from the
front of the vehicle. When the
wheels tilt outward at the top, the camber is positive (+
Thrust angles description
Fig. 5: Illustrating Thrust Angles
The front wheels aim or steer the vehicle. The rear wheels control tracking.
This tracking action relates to the
thrust angle (3). The thrust angle is the path th
SEE MORE:
Differential carrier assembly replacement
Removal Procedure
Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle
.
Drain the rear differential carrier. Refer to Differential Oil
Replacement .
Disconnect the propeller shaft from the rear differential and relocate
to the side. Refer to Two-Piece
Propeller Shaft R
DTC P2534 OR P2535 (Chassis control module)
Diagnostic Instructions
Perform the Diagnostic System Check - Vehicle prior to using this
diagnostic procedure.
Review Strategy Based Diagnosis for an overview of the diagnostic
approach.
Diagnostic Procedure Instructions provides an overview of each
diagnostic category.
DTC Descriptor
DT
© 2019-2026 Copyright www.chevtrax.com
