Chevrolet Trax Owners & Service Manuals

Chevrolet Trax: Schematic wiring diagrams

SPECIFICATIONS

FASTENER TIGHTENING SPECIFICATIONS

Fastener Tightening Specifications

Fastener Tightening Specifications

SCHEMATIC WIRING DIAGRAMS

MOVEABLE WINDOW WIRING SCHEMATICS (ENCORE)

Front Windows

Fig. 1: Front Windows
Fig. 1: Front Windows

Rear Windows

Fig. 2: Rear Windows
Fig. 2: Rear Windows

MOVEABLE WINDOW WIRING SCHEMATICS (TRAX)

Front and Rear Power Windows (A33, A66, AXG)

Fig. 3: Front and Rear Power Windows (A33, A66, AXG)
Fig. 3: Front and Rear Power Windows (A33, A66, AXG)

Express Front Drivers (AXG)

Fig. 4: Express Front Drivers (AXG)
Fig. 4: Express Front Drivers (AXG)

Front Doors (A55 Without A33)

Fig. 5: Front Doors (A55 Without A33)
Fig. 5: Front Doors (A55 Without A33)

DEFOGGER WIRING SCHEMATICS (ENCORE)

Defogger

Fig. 6: Defogger
Fig. 6: Defogger

DEFOGGER WIRING SCHEMATICS (TRAX)

Defogger

Fig. 7: Defogger
Fig. 7: Defogger

    READ NEXT:

     Fixed and Moveable Windows - Diagnostic information and procedures

     DTC B0283: Rear defrost circuit

    DIAGNOSTIC CODE INDEX DTC B0283: REAR DEFROST CIRCUIT Diagnostic Instructions Perform the Diagnostic System Check - Vehicle prior to using this diagnostic procedure. Review Strategy Based Diagn

     DTC B316B, B317A, B318A, OR B319A (AXG, AED, AEQ): Window switch

    Diagnostic Instructions Perform the Diagnostic System Check - Vehicle prior to using this diagnostic procedure. Review Strategy Based Diagnosis for an overview of the diagnostic approach. Diag

    SEE MORE:

     DTC P0128

    Diagnostic Instructions Perform the Diagnostic System Check - Vehicle prior to using this diagnostic procedure. Review Strategy Based Diagnosis for an overview of the diagnostic approach. Diagnostic Procedure Instructions provides an overview of each diagnostic category. DTC Descriptor DT

     Rear differential clutch control module programming and setup

    Special Tools EL-49642 SPS Programming Support Tool For equivalent regional tools, refer to Special Tools. NOTE: DO NOT program a control module unless directed to by a service procedure or a service bulletin. If the ECU is not properly configured with the correct calibration software, the ECU w

    © 2019-2026 Copyright www.chevtrax.com