Removal Procedure
WARNING: Do not attempt to repair or alter the head impact
energy-absorbing
material glued to the headliner or to the garnish trims. If the material
is damaged, replace the headline
Removal Procedure
WARNING: Do not attempt to repair or alter the head impact
energy-absorbing
material glued to the headliner or to the garnish trims. If the material
is damaged, replace the headline
Preparation Procedure
NOTE:
Horizontal aim is not adjustable on this vehicle. Adjust the fog lamp as
required
using the adjusting screw above the projector lens on the outside of the front
bumper fascia. Prior to aiming the fog lamps, perform the following steps:
Completely assemble all of the co
NOTE: The park brake cable adjusting nut is a nylon lock type. Use
ONLY HAND
TOOLS whenever tightening or loosening the adjusting nut.
Apply and fully release the park brake several times. Verify that the
park brake lever releases completely.
Turn ON the ignition. Verify the red BRAKE warning