Chevrolet Trax: Diagnostic information and procedures
Chevrolet Trax (2013-2022) Workshop Manual / Brakes / Drum Brakes / Diagnostic information and procedures
READ NEXT:
Brake drum diameter measurement
SPECIFICATIONS
FASTENER TIGHTENING SPECIFICATIONS
Fastener Tightening Specifications
DRUM BRAKE COMPONENT SPECIFICATIONS
Drum Brake Component Specifications
DIAGNOSTIC INFORMATION AND PROCEDURES
B
Drum brake hardware inspection
Fig. 4: Drum Brake Hardware
WARNING: Refer to Brake Dust Warning .
Visually inspect the drum brake upper return spring (1) for the
following conditions:
Excessive corrosion
Excessive stretch
SEE MORE:
DTC P0532 OR P0533: Air conditioning (A/C) Refrigerant pressure sensor
Diagnostic Instructions
Perform the Diagnostic System Check - Vehicle prior to using this
diagnostic procedure.
Review Strategy Based Diagnosis for an overview of the diagnostic
approach.
Diagnostic Procedure Instructions provides an overview of the diagnostic
category.
DTC Descriptors
DT
Headlamp aiming
Visual Aiming Preparation Procedure
NOTE: Some state and
local laws specify requirements for headlamp aim. Comply with
all of these laws when performing any headlamp aiming operations.
Headlamp aim should be checked:
When a new headlamp capsule is installed.
If service or repairs to the front en
© 2019-2026 Copyright www.chevtrax.com
