Chevrolet Trax: Description and operation
- Brake assist system description and operation
- Brake booster vacuum assist description and operation
- Hydraulic brake system description and operation
READ NEXT:
Brake assist system description and operation
System Component Description
The brake assist system consists of the following:
Brake Pedal
Receives, multiplies and transfers brake system input force from driver.
Brake Pedal Pushrod
Transfers multi
Brake booster vacuum assist description and operation
Hydraulic Brakes Block Diagram
Fig. 193: Hydraulic Brakes Block Diagram
In order to assure that vacuum is available to the vacuum brake booster, the
car can contain a vacuum pump
either in additi
Hydraulic brake system description and operation
System Component Description
The hydraulic brake system consists of the following:
Hydraulic Brake Master Cylinder Reservoir
Contains a supply of brake fluid for the hydraulic brake system.
Hydraulic
SEE MORE:
Front wheel drive shaft replacement - right side
Special Tools
J 45859 Hub Spindle Remover
Fro regional special tools, refer to Special Tools.
Removal Procedure
Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle
.
Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and
Installation .
Fig. 17: Front Su
Chassis control module programming and setup
NOTE:
DO NOT program a control module unless directed to by a service
procedure or a service bulletin. If the control module is not properly
configured with the correct calibration software, the control module will
not control all of the vehicle features properly.
Ensure the programming tool
© 2019-2025 Copyright www.chevtrax.com
