Chevrolet Trax: Description and operation
Chevrolet Trax (2013-2022) Workshop Manual / Suspension & Steering / Tires and Wheels / Description and operation
- All seasons tires descriptio
- Replacement wheels description
- Tires and wheels description and operation
READ NEXT:
All seasons tires descriptio
Fig. 16: Identifying All Seasons Tire Marking
Most GM vehicles are equipped with steel belted all-season radial tires as
standard equipment. These tires
qualify as snow tires, with a higher than av
Replacement wheels description
Replace the wheel if any of the following conditions exist:
The wheel exhibits excessive runout.
The wheel is bent.
The wheel is cracked.
The wheel is severely rusted.
The wheel is severely corr
Tires and wheels description and operation
Balancing Tires
There are two types of tire and wheel balancing: static and dynamic.
Static balance is the equal distribution of weight around the wheel. Assemblies
that are statically unbalanced
ca
SEE MORE:
Engine component description
Cylinder Block
The cylinder hollow frame structured in-line 4 cylinder. The block has 5
crankshaft bearings with the thrust
bearing located on the third bearing from the front of the engine.
Crankshaft
The crankshaft is a steel crankshaft. It is supported in 5 main journals with
main bearings whic
Steering angle sensor replacement
Fig. 7: View Of Steering Angle Sensor
Steering Angle Sensor Replacement
STEERING ANGLE SENSOR CENTERING
The steering angle sensor does not require centering often. Centering of the
steering angle sensor might be
required after certain service procedures are performed. Some of these
procedures
© 2019-2026 Copyright www.chevtrax.com
